Thor Mining PLC - Vanadium Field Sampling Results
US URANIUM / VANADIUM PROJECT
VANADIUM FIELD SAMPLING RESULTS POSITIVE
URANIUM RESULTS PENDING FROM SPECIALIST LAB
The directors of
Other samples identified as potentially uranium rich, are being assayed at a separate laboratory facility which is better equipped for samples of this nature.
AVU holds interests in uranium and vanadium focussed projects, in
Highlights:
· The eight initial assay results averaged 1.0% V2O5 and 0.043% U3O8.
· Two outcrop samples from the Rim Rock mine were 1.8% and 2.0% V2O5.
· Eight of the twenty-one field samples had radioactivity levels low enough for routine assay process to be completed.
· The remaining 13 samples have been transported to a specialist laboratory with facilities designed to handle higher radiation level material.
"We are very pleased with the calibre of the vanadium samples collected, and in particular the uranium content of several of these."
"Assays of the higher-level radioactive samples are eagerly awaited. These assay results are expected later in July."
The field component of the due diligence program undertaken by the company's
Mineralisation predominantly occurs in the Salt Wash geological unit, where most sample locations occur. A combination of in situ outcrop samples and historic mine dump samples were sampled.
Mineralisation varies between vanadium rich and uranium rich. Only assay results have been received from vanadium rich samples at this time as summarised in Table A.
Sampling was not conducted at the Vanadium King site in
|
Table A: Sample and assay summary |
|||||||
|
Prospect |
Sample No. |
Easting |
Northing |
Sample Type |
% U3O8 |
% V2O5 |
Comments |
|
VANADIUM SAMPLE RESULTS |
|||||||
|
Ground Hog |
WR-002 |
688030 |
4223849 |
Outcrop |
0.061 |
0.965 |
chip sample from outcrop |
|
Big Bull |
WR-007 |
692453 |
4226633 |
Dump |
0.099 |
0.648 |
dump sample |
|
Big Bull |
WR-008 |
692468 |
4226632 |
Outcrop |
0.031 |
0.296 |
chip sample from outcrop |
|
|
WR-013 |
689730 |
4225628 |
Outcrop |
0.008 |
0.880 |
chip sample from outcrop |
|
|
WR-017 |
687660 |
4225839 |
Adit wall |
0.112 |
1.792 |
chip sample from Vanadium rich wall exposure |
|
|
WR-018 |
687731 |
4225668 |
Outcrop |
0.015 |
2.000 |
chip sample from Vanadium rich wall exposure |
|
|
WR-019 |
687108 |
4224016 |
|
0.012 |
1.054 |
chip sample from Vanadium rich wall exposure |
|
Ground Hog |
WR-021 |
687921 |
4223833 |
Outcrop |
>0.006 |
0.434 |
chip sample from Vanadium rich wall exposure |
|
URANIUM SAMPLES - AWAITING ASSAY |
|||||||
|
Ground Hog |
WR-001 |
687927 |
4223836 |
Outcrop |
|
|
chip sample from outcrop |
|
|
WR-003 |
687660 |
4225839 |
Adit wall |
|
|
chip sample from outcrop |
|
|
WR-004 |
687660 |
4225839 |
Grab |
|
|
ore spillage |
|
Wedding Bell |
WR-005 |
687333 |
4224766 |
Grab |
|
|
dump sample |
|
Wedding Bell |
WR-006 |
687202 |
4224797 |
Grab |
|
|
loose sample from historic test pit |
|
unnamed |
WR-009 |
691031 |
4226911 |
Dump |
|
|
dump sample |
|
unnamed |
WR-010 |
690763 |
4226921 |
Dump |
|
|
dump sample |
|
unnamed |
WR-011 |
690468 |
4226608 |
Dump |
|
|
dump sample |
|
|
WR-012 |
690142 |
4225830 |
Dump |
|
|
dump sample |
|
|
WR-014 |
689732 |
4225603 |
Dump |
|
|
dump sample |
|
unnamed |
WR-015 |
688347 |
4225808 |
Grab |
|
|
ore spillage |
|
|
WR-016 |
687627 |
4225392 |
Dump |
|
|
dump sample |
|
|
WR-020 |
687081 |
4223998 |
|
|
|
chip sample |
PROJECT ACQUISITION
On
A processing plant which has historically taken ore from the region on a toll treatment basis is located near
Colorado Claims
Standard holds 199 contiguous
a https://pubs.er.usgs.gov/publication/pp300
The Uravan Mineral Belt and adjacent uranium-vanadium mining districts of the Colorado Plateau are reported to have produced, over the past 100 years, in excess of 85million lbs U3O8 and over 660 million lbs of V2O5² from the Salt Wash sandstone formation of the Plateau. The average production grades from the Uravan Mineral Belt from the 1940's to
bwww.osti.gov/servlets/purl/6512174
Utah Claims
Cisco holds 100 BLM claims in south east
https://www.thormining.com/sites/thormining/media/miscellaneous/terra-ventures-20070521.pdf
The review team visited the site to assess access issues associated with potential drilling campaigns. The area has good local infrastructure and is at the northern margin of the historic uranium mining area of
Available data to date of the Vanadium King (
The information contained within this announcement is deemed to constitute inside information as stipulated under the Market Abuse Regulations (EU) No. 596/2014. Upon the publication of this announcement, this inside information is now considered to be in the public domain.
Enquiries:
|
|
|
|
Updates on the Company's activities are regularly posted on Thor's website www.thormining.com, which includes a facility to register to receive these updates by email, and on the Company's twitter page @ThorMining.
Competent Person's Report
The information in this report that relates to exploration results is based on information compiled by
About
Thor Mining PLC (AIM, ASX: THR) is a resources company quoted on the AIM Market of the London Stock Exchange and on ASX in Australia.
Thor holds 100% of the advanced Molyhil tungsten project in the Northern Territory of Australia, for which an updated feasibility study in
Adjacent Molyhil, at Bonya, Thor holds a 40% interest in deposits of tungsten, copper, and vanadium, including Inferred Resource estimates for the White Violet and Samarkand tungsten deposits and the Bonya copper deposit².
Thor also holds 100% of the Pilot Mountain tungsten project in Nevada USA which has a JORC 2012 Indicated and Inferred Resources Estimate³ on 2 of the 4 known deposits.
Thor holds a 25% interest Australian copper development company
· rights to earn up to a 75% interest in the mineral rights and claims over the resource⁴ on the portion of the historic Kapunda copper mine in South Australia considered recoverable by way of in situ recovery; and
· rights to earn up to 75% of the Moonta copper project, also in
Thor also holds a production royalty entitlement from the Spring Hill Gold project⁶ of:
• A$5.70 per ounce of gold produced from the Spring Hill tenements where the gold produced is sold for up to A$1,500 per ounce; and
• A$13.30 per ounce of gold produced from the Spring Hill tenements where the gold produced is sold for amounts over A
Notes
¹ Refer ASX and AIM announcement of 23 August 2018
² Refer ASX and AIM announcements of 26 November 2018 and
³ Refer AIM announcement of
⁴ Refer AIM announcement of 10 February 2018 and ASX announcement of 12 February 2018
⁵ Refer ASX and AIM announcement of 15 August 2019
⁶ Refer AIM announcement of 26 February 2016 and ASX announcement of 29 February 2016
JORC Code, 2012 Edition - Table 1 report template
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
|
Criteria |
JORC Code explanation |
Commentary |
|
Sampling techniques |
· Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. · Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. · Aspects of the determination of mineralisation that are Material to the Public Report. · In cases where 'industry standard' work has been done this would be relatively simple (eg 'reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information. |
· Samples comprised a combination of rock chips from in-situ exposures and grab samples from historic mine dumps. · The samples are not considered representative but rather indicative. · Mineralisation is characterised by the presence of yellow carnotite allowing sampling to be guided by visual mineral identification in addition to handheld scintillometer readings.
|
|
Drilling techniques |
· Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc). |
· Not applicable |
|
Drill sample recovery |
· Method of recording and assessing core and chip sample recoveries and results assessed. · Measures taken to maximise sample recovery and ensure representative nature of the samples. · Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material. |
· Not applicable |
|
Logging |
· Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. · Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. · The total length and percentage of the relevant intersections logged. |
· Samples and source exposures were qualitatively logged. |
|
Sub-sampling techniques and sample preparation |
· If core, whether cut or sawn and whether quarter, half or all core taken. · If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. · For all sample types, the nature, quality and appropriateness of the sample preparation technique. · Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. · Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance results for field duplicate/second-half sampling. · Whether sample sizes are appropriate to the grain size of the material being sampled. |
· Samples weighed between 1 and 2kg · There was no screening or splitting and no QAQC · The samples are considered adequate to provide indication of presence of mineralisation rather than to quantify it. |
|
Quality of assay data and laboratory tests |
· The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. · For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. · Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established. |
· The analytical technique comprised an initial four acid digest with ICP-AES determination. The laboratory technique is considered total. · Internal laboratory control procedures involve duplicate assaying of randomly selected assay pulps as well as internal laboratory standards. |
|
Verification of sampling and assaying |
· The verification of significant intersections by either independent or alternative company personnel. · The use of twinned holes. · Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. · Discuss any adjustment to assay data. |
· Sample results are consistent with field observations. · No holes have been drilled or twinned. · Primary data was recorded using field note books and GPS digital memory. · V2O5 grades are reported - these are determined by multiplying the raw vanadium assays by 1.7852. |
|
Location of data points |
· Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. · Specification of the grid system used. · Quality and adequacy of topographic control. |
· A hand held GPS has been used to determine locations. · The grid system is NAD83 zone 12. · Topographic control is adequate. |
|
Data spacing and distribution |
· Data spacing for reporting of Exploration Results. · Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. · Whether sample compositing has been applied. |
· Data spacing and location is random. It is not adequate for resource estimation. · This data will not be used to estimate a resource. · There has been no sample compositing |
|
Orientation of data in relation to geological structure |
· Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. · If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material. |
· Not applicable. |
|
Sample security |
· The measures taken to ensure sample security. |
· Samples remained in the custody of the supervising geologist from collection through to delivery to the assay laboratory |
|
Audits or reviews |
· The results of any audits or reviews of sampling techniques and data. |
· No audits undertaken. |
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
|
Criteria |
JORC Code explanation |
Commentary |
|
Mineral tenement and land tenure status |
· Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. · The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area. |
· The sampled locations fall within the registered mining claims of · The tenements are in good standing and no known impediments exist. |
|
Exploration done by other parties |
· Acknowledgment and appraisal of exploration by other parties. |
· No other party's exploration data has been referenced. |
|
Geology |
· Deposit type, geological setting and style of mineralisation. |
· The geological setting comprises sandstone hosted uranium vanadium mineralisation. |
|
Drill hole Information |
· A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. · If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. |
· Sample data is provided in the text as table 1.
|
|
Data aggregation methods |
· In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated. · Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. · The assumptions used for any reporting of metal equivalent values should be clearly stated. |
· None used |
|
Relationship between mineralisation widths and intercept lengths |
· These relationships are particularly important in the reporting of Exploration Results. · If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. · If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg 'down hole length, true width not known'). |
· Not applicable |
|
Diagrams |
· Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views. |
· Figures and Tables provided in the text. |
|
Balanced reporting |
· Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results. |
· All available results have been provided. |
|
Other substantive exploration data |
· Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances. |
· No other data to report |
|
Further work |
· The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scale step-out drilling). · Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive. |
· While further work is likely to be planned, the results of this due diligence program provided no assistance to the targeting of future drilling. |
This information is provided by RNS, the news service of the
Proactive Investors is a publisher of financial news and information. No content in this record, or published on the Proactive Investors website (the "Site"), constitutes a recommendation that any particular security, portfolio of securities, transaction, or investment strategy is suitable or advisable for any specific person. No content is tailored to any specific person's needs, objectives, or financial situation.
Proactive Investors is not a registered investment adviser or broker-dealer and does not provide personalized investment advice. Nothing in this record constitutes investment advice or a recommendation to buy, hold, or sell any security. None of the information providers or their affiliates will advise you personally concerning the nature, potential, advisability, value, or suitability of any particular security, portfolio, transaction, or investment strategy. Any decision to buy, sell, or hold a security should be made only after consulting an appropriately qualified, licensed financial adviser and reading all relevant offering documentation.
This record, and any record we publish by or on behalf of our clients, should not be construed as an offer or solicitation to buy or sell any product or security. Our content is independent financial journalism, produced in a neutral, objective style with full source attribution.
In accordance with the Federal Trade Commission's guidelines on material connections, Proactive Investors discloses the following: we may receive cash or, in some cases, equity compensation from companies whose news is distributed through our platform. This compensation is for news distribution and media services, not for editorial content or coverage decisions. Where Proactive Investors has a commercial relationship with a company covered in this record, that relationship is disclosed within the article. Any such relationship does not determine, influence, or shape the editorial content produced. Where we receive equity compensation, such securities are held independently by a third-party broker and sold at the broker's discretion.
The Site may contain opinions from time to time regarding securities mentioned in other products, including company-related products, and those opinions may differ from those obtained through another Proactive Investors product. Opinions and commentary reflect the views of the named author at the time of writing and are subject to change without notice.
Price and other data is supplied by sources believed to be reliable. Any calculations are made using such data. Neither the data nor the calculations are guaranteed by those sources, by Proactive Investors, by the information providers, or by any other person or entity, and may not be complete or accurate.
From time to time, reference may be made in our marketing materials to previously published articles or opinions. Such references may be selective, may reference only a portion of an article, and are likely not to be current. As markets change continuously, previously published information and data may not be current and should not be relied upon.
FOR OUR FULL DISCLAIMER CLICK HERE