European Green Trns. - Final Olserum Drilling Results
European Green Transition plc
("European Green Transition", "EGT" or "the Company")
Final Olserum Drilling Results
Final results from the Olserum REE project
European Green Transition (AIM: EGT), a company developing green economy assets in
Highlights
· All results from the Olserum REE drill programme have now been received with mineralisation intersected in all 13 drill holes confirming the district scale potential of the project.
· Results support EGT's strategy to monetise the Project through sale or partnership as the Company continues to direct its focus towards revenue generating opportunities in the green economy.
· Hole OLS24-05 intersected multiple mineralised structures including 5m grading 0.48% Total Rare Earth Oxides (TREO) with 18.7% Heavy Rare Earth Oxides (HREO) from 70.5m to 75.5m.
· Hole OLS24-07 intersected 2.45m grading 2.71% TREO (33.4% HREO)) from 40.0m to 42.45m within a broad mineralised zone averaging 22.5m grading 0.58% TREO.
· Hole OLS24-11 intersected 8.2m grading 0.94% TREO (22% HREO) from 44.55 to 52.75m including 3.2m grading 1.57 % TREO.
· Hole OLS24-12 intersected several vein zones including 2.25m grading 1.33% TREO (17.5% HREO) from 102.95m to 105.2m and 2.85m grading 1.03% TREO (29% HREO) from 170.2m.
"This final batch of results from the Olserum REE project builds on the previously announced results confirming the district-scale potential of the REE-mineralised system at Olserum. Several mineralised structures have been encountered at Djupedal and Olserum West and the drilling has demonstrated vertical continuity from surface mineralised outcrops up to 150m vertical depth.
The drill results have validated our exploration model and the Directors believe that the Olserum REE project could be attractive to a range of potential acquirers or partners. The Company now looks forward to sharing these results with interested parties with the aim of monetising the Olserum asset as EGT focusses on identifying revenue-generating opportunities across the green economy."
Summary of Drill Results
EGT has received the final batch of assay results from five diamond drill holes drilled as part of a 13-hole scout drill program to test the district-scale REE potential at the Olserum REE Project in

Djupedal Prospect
Hole OLS25-05 at Djupedal was located 167m southwest of holes OLS24-01 and OLS24-02 and 215m southwest of the historic workings. The hole was a deep, angled hole to test the mineralised structure at greater depth beneath the workings and to determine if there was continuity from the intersections in hole OLS24-01 (1.5m grading 3.48% TREO) and OLS24-02 (7.25m grading 0.72% TREO). The deeper hole successfully intersected the mineralised structure with 3.35m grading 0.4% TREO from 192.35m downhole depth. This intersection demonstrates vertical continuity from surface of >150m. Another vein zone from 221.3m, which may be a splay of this structure, had an intersection of 1.75m grading 0.72% TREO and was notably rich in heavy rare earths (72% HREO) and Yttrium (Y) with a peak value of 0.41% Y.
Drill hole OLS24-05 also intersected another mineralised zone at shallower depth which is outcropping 110m southwest of the historic workings and from which eight grab samples on surface averaged 0.86% TREO. The intersections on this structure are within a broad altered and anomalous to low-grade zone which grades 0.26% TREO over 35.15m from 57.5m to 92.65m and includes multiple sub 1% TREO samples. The intersections are set out in the tables below.
Hole OLS24-07 and OLS24-08 were drilled 450m west of hole OLS24-05, in the west of the Djupedal prospect, to target the strong mineralisation in outcrop which was previously channel sampled with results of 3m grading 1.58% TREO and 1m grading 2.27% TREO across a 5m partially exposed zone. Assays received for hole OLS24-07 show that it intersected a strongly mineralised zone with 2.45m grading 2.71% TREO (33.4% HREO) on the main structure which lies within a much broader zone averaging 22.5m grading 0.58% TREO that consists of both high-grade veins with interspersed lower grade wallrock. This intersection on the main structure is superior to the result in OLS24-08 (1.18% TREO over 2.4m) which was previously announced. These two intersections also confirm vertical continuity of the structure to >60m depth at this location and potentially point to a higher-grade shoot within the district-scale mineralised shear system. Other significant intersections in this hole are included in the table below.
Hole OLS24-10 was located in the centre of the Djupedal prospect within a strong magnetic anomaly and approximately 50m east of a surface magnetite iron working and dumps. The hole was drilled to the northeast and intersected several alteration zones with associated monazite and xenotime mineralisation. The best intersections were 0.5m grading 1.02% TREO (15% HREO) from 22.15m to 22.65m which occurs within a low-grade zone of 3.15m grading 0.32% TREO, and 1.55m grading 0.98% TREO (22% HREO) from 46.75m to 48.3m which occurs within a low-grade zone of 13.65m grading 0.32% TREO (30% HREO) from 43.85 to 57.5m.
Olserum West Prospect
OLS24-11, located near the centre of the Olserum West zone, was drilled at -45° to the southwest to test beneath a broad mineralised outcrop which was previously channel sampled (OLS-CH-03) and which had 14m grading 0.496% TREO across the outcrop. The hole intersected numerous zones of alteration which contain broad low-grade mineralisation and some higher-grade intercepts including the best intersection beneath the channel sampled outcrop which is 3.2m grading 1.57 % TREO (20% HREO) from 45.55m to 48.75m. This intersection occurs within a broader zone of 8.2m grading 0.94% TREO (22% HREO) from 44.55 to 52.75m which is substantially higher than the outcrop grade and comparable to some of the intersections within the historic resource 300m to the southeast of this hole.
Other intersections in the same hole are as follows:
· 1.25m grading 0.53% TREO (26.5% HREO) from 59.75m to 61.0m
· 0.7m grading 2.84% TREO (28% HREO) from 127.9m to 128.6m.
· Other low-grade zones associated with biotite-magnetite alteration occur over broad widths including 0.2% TREO over 7m from 96.5m and 0.34% TREO over 5m from 110.5m including 1m grading 0.53% TREO (28% HREO).
OLS24-12 was drilled from the same pad as hole OLS24-11 but at a steeper angle of -65° to test the continuity and dip of the mineralised structures. Several narrow zones were intersected in this hole with some variable geology at the top of this hole compared to OLS24-11. The intersection beneath the outcropping mineralisation is of lower-grade with 10m grading 0.15% TREO beneath the channel sampled outcrop and post-mineral shearing was observed in this hole which may explain the variation in grade and thickness, however there are a number of notable intersections in the hole including the following:
· 0.6m grading 2.56% TREO (13% HREO) from 86.05m to 86.65m
· 2.25m grading 1.33% TREO (17.5% HREO) from 102.95m to 105.2m including 1.05m grading 2.57% TREO
· 1.15m grading 0.51% TREO (18% HREO) from 116.85m to 118.0m
· 2.85m grading 1.03% TREO (29% HREO) from 170.2m to 173.05 including 0.5m grading 3.57% TREO
Summary of Results from the Djupedal and Olserum West Prospects
The latest results from Djupedal build on the previous results, confirming the presence of multiple mineralised structures and de-risk the prospect for a potential incoming partner. There are now several low-risk targets at Djupedal to step out along and drill test in order to seek dilations and higher-grade zones giving potential partners a range of options to advance the prospect. In addition, there are similar structures with REE mineralisation exposed 900m to the south of Djupedal at the recently discovered Stora Lockerum zone which is itself approximately 500m long. This and other prospects provide a pipeline of targets to advance.
The results for the three holes drilled at Olserum West show that there is significant mineralisation in the area 300m from the historic resource which was not previously drill tested. This includes the highest-grade drill assay to date of 0.5m grading 8.83% TREO in hole OLS24-13 in addition to 8.2m grading 0.94% TREO in OLS24-11. The edge of the historic resource lies 300m to the southeast of holes OLS24-11 & OLS24-12 suggesting that there is undiscovered potential within this gap. Based on drilling to date, the mineralisation along the altered shear-zone structures does appear to have good continuity which is evident from the high-success rate of the scout drill program with no barren holes reported. There is a pinch and swell nature to the mineralised zones giving some variability to the width and the assay grades but this is a typical feature of many shear zone hosted deposits. The coarse nature of the REE phosphate mineralisation leads to some sample variability given the relatively narrow core diameter and sample volume, however, the coarse REE-phosphate mineralisation is favourable from a metallurgical point of view allowing good recoveries during flotation which has been demonstrated with the preliminary metallurgical study results announced on the 17th
Next Steps
The Company believes that there are many positive attributes to the Olserum REE Project which could make it an attractive project for a potential acquirer. These include the district-scale REE potential of the project, the pipeline of additional targets to test, the presence of the defined historic Olserum resource, the project's location on commercial forestry lands with excellent infrastructure and the positive metallurgical characteristics.
Olserum is an important European REE project which has been designated a National Interest project for potential REE exploitation by the Swedish Geological Survey in
Table 1: Coordinates and relevant information for EGT drill holes at the Olserum REE project.
|
HOLE ID |
PROSPECT |
EASTING SWEREF 99TM |
NORTHING SWEREF 99TM |
ELEVATION (m) |
AZIMUTH GYRO |
DIP |
TOTAL DEPTH (m) |
ASSAY RESULTS |
|
OLS24-01 |
Djupedal |
578392 |
6425419 |
75 |
54.7 |
-45 |
66.4 |
29th Oct |
|
OLS24-02 |
Djupedal |
578392.8 |
6425419.8 |
75 |
53.9 |
-75 |
84.1 |
29th Oct |
|
OLS24-03 |
Djupedal |
578423 |
6425407 |
66 |
53.1 |
-43 |
62.5 |
29th Oct |
|
OLS24-04 |
Djupedal |
578422.7 |
6425406.7 |
66 |
53.8 |
-74.4 |
71.95 |
29th Oct |
|
OLS24-05 |
Djupedal |
578261 |
6425317 |
55 |
45 |
-45 |
229.5 |
This RNS |
|
OLS24-06 |
Djupedal |
578287 |
6425332 |
55 |
224.5 |
-44.6 |
101.8 |
21st Nov |
|
OLS24-07 |
Djupedal |
577843 |
6425501 |
47 |
35.2 |
-45 |
89.55 |
This RNS |
|
OLS24-08 |
Djupedal |
577821 |
6425486 |
47 |
34.2 |
-44.5 |
111.9 |
21st Nov |
|
OLS24-09 |
Djupedal |
578033 |
6425364 |
50 |
217.8 |
-43.8 |
83.7 |
21st Nov |
|
OLS24-10 |
Djupedal |
578030 |
6425319 |
50 |
39.96 |
-45.1 |
104.4 |
This RNS |
|
OLS24-11 |
Olserum West |
579730 |
6424040 |
65 |
235 |
-45 |
162.9 |
This RNS |
|
OLS24-12 |
Olserum West |
579730.8 |
6424040.8 |
65 |
234.58 |
-65 |
222.65 |
This RNS |
|
OLS24-13 |
Olserum West |
579694 |
6424069 |
43 |
238.66 |
-44.9 |
111.75 |
21st Nov |
|
TOTAL :13 |
1,503.1 |
13/13 |
||||||
Table 2: Summary of intersections from the latest EGT drill hole results at the Olserum REE Project.
|
HOLE ID |
From (m) |
To (m) |
Interval (m) |
TREO % |
PMREO % |
NdPr Oxides % |
Dy ppm |
Tb ppm |
|
OLS24-05 |
64.5 |
65.5 |
1 |
0.72 |
0.28 |
0.13 |
133 |
23.4 |
|
(within low-grade zone*) |
57.5 |
68.5 |
11 |
0.23 |
0.09 |
0.04 |
45 |
7.8 |
|
|
70.5 |
75.5 |
5 |
0.48 |
0.2 |
0.09 |
74 |
14.5 |
|
|
78.4 |
79.4 |
1 |
0.53 |
0.2 |
0.087 |
110 |
19.8 |
|
|
91.4 |
91.65 |
0.25 |
3.717 |
1.64 |
0.74 |
362 |
87.5 |
|
All above within anomalous zone* |
57.5 |
92.65 |
35.15 |
0.26 |
0.1 |
0.04 |
46 |
8.3 |
|
|
197.25 |
200.6 |
3.35 |
0.4 |
0.15 |
0.07 |
74 |
13 |
|
(within low-grade zone*) |
192.35 |
200.6 |
8.25 |
0.35 |
0.11 |
0.05 |
89 |
13.8 |
|
|
221.3 |
223.05 |
1.75 |
0.72 |
0.11 |
0.05 |
332 |
45.2 |
|
OLS24-07 |
30.4 |
30.9 |
0.5 |
1.5 |
0.55 |
0.25 |
306 |
54.4 |
|
|
33.85 |
35.0 |
1.15 |
1.21 |
0.52 |
0.24 |
149 |
32.8 |
|
|
40 |
42.45 |
2.45 |
2.71 |
0.91 |
0.41 |
672 |
113 |
|
|
49.3 |
50.9 |
1.6 |
0.6 |
0.25 |
0.11 |
90 |
16.6 |
|
(all above within mineralised zone*) |
30.4 |
52.9 |
22.5 |
0.58 |
0.22 |
0.1 |
119 |
21 |
|
OLS24-10 |
22.15 |
22.65 |
0.5 |
1.03 |
0.45 |
0.2 |
141 |
31.1 |
|
(within low-grade zone*) |
20.35 |
23.5 |
3.15 |
0.33 |
0.14 |
0.06 |
58.1 |
11.5 |
|
|
46.75 |
48.3 |
1.55 |
0.98 |
0.38 |
0.18 |
190 |
36.8 |
|
(within low-grade zone*) |
43.85 |
57.5 |
13.65 |
0.28 |
0.1 |
0.05 |
63 |
11.4 |
|
OLS24-11 |
45.55 |
48.75 |
3.2 |
1.57 |
0.65 |
0.29 |
243 |
46.6 |
|
(within broader zone*) |
44.55 |
52.75 |
8.2 |
0.94 |
0.38 |
0.17 |
159 |
30 |
|
|
59.75 |
61.0 |
1.25 |
0.53 |
0.19 |
0.09 |
127 |
23 |
|
|
127.9 |
128.6 |
0.7 |
2.84 |
1.06 |
0.44 |
645 |
114 |
|
OLS24-12 |
86.05 |
86.65 |
0.6 |
2.56 |
1.14 |
0.48 |
262 |
59.9 |
|
|
102.95 |
105.2 |
2.25 |
1.33 |
0.55 |
0.24 |
227 |
44.8 |
|
including |
102.95 |
104.0 |
1.05 |
2.57 |
1.06 |
0.46 |
450 |
88.6 |
|
|
116.85 |
118.0 |
1.15 |
0.51 |
0.21 |
0.09 |
73 |
15.3 |
|
|
170.2 |
173.05 |
2.85 |
1.03 |
0.39 |
0.18 |
204 |
37.9 |
|
|
190.45 |
190.95 |
0.5 |
0.72 |
0.27 |
0.12 |
165 |
30.4 |
|
|
213.2 |
213.6 |
0.4 |
1.00 |
0.45 |
0.21 |
69 |
18.2 |
*includes internal dilution >2m with <0.4% TREO

Figure 2 Section showing drillhole OLS24-05 at Djupedal based on initial logging. New results and other significant intersections for nearby holes are labelled.

Figure 3 Section showing drillhole OLS24-07 and OLS24-08 at Djupedal based on initial logging with significant intersections in drill core and channel samples labelled.

Figure 4 Section showing drillhole OLS24-09 and OLS24-10 at Djupedal based on initial logging with significant intersections in drill core labelled.

Figure 5 Section showing drillhole OLS24-10 and OLS24-11 at Olserum West based on initial logging with significant intersections in drill core and channel samples labelled.
Competent Person
All scientific and technical information in this announcement has been prepared under the supervision of and reviewed and approved by EurGeol Aiden Lavelle,
APPENDIX 1 JORC TABLE 1 - JORC CODE, 2012 EDITION - TABLE 1
Section 1 Sampling Techniques and Data (Criteria in this section apply to all succeeding sections.)
|
Criteria |
Explanation |
Explanation |
|
|
Sampling techniques |
Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. |
Samples from three diamond drill holes at the Djupedal prospect and two from Olserum West are reported here. The five holes totalling 809.0m had 478 samples incl. QAQC samples. 13 holes were drilled by EGT for a total of 1503.1m. Core was NQ2 (50.6mm diameter). All diamond drill core samples analysed were of half core cut by automated core saw. Approximately 1:30 samples were 1/4 core duplicates. The remaining half of the core was returned to the core box as a permanent record of the drill hole and will be stored at the SGU archive facilities in Mala, north |
|
|
Drilling techniques |
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (e.g. core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc). |
Diamond drilling retrieved full core of NQ2 (50.6mm) diameter using standard wireline drilling with a diamond bit and core barrel. The rig used was a DBC ESD9 MACHINA owned and operated by Norse Diamond Drilling AS. Core was orientated where possible and surveying was done with a Veracio TruGyro, a non-magnetic true north-seeking instrument due to the magnetic nature of the mineralisation. Downhole surveys measurements collected between 3 and 20m intervals. Downhole gamma surveys were conducted on hole OLS24-04 and all subsequent holes. |
|
|
Drill sample recovery |
• Method of recording and assessing core and chip sample recoveries and results assessed. |
Core recovery was excellent (>95% up to 100%) due to the hard crystalline nature of the rock in all holes. Only localised minor fracturing and core loss was noted with late faults which did not usually coincide with mineralised intersections. |
|
|
Logging |
|
All core was logged for recovery, RQD, solid core %, lithology and alteration with structural measurements taken on oriented core where practical and useful. The logging was followed by markup for sampling and photography of core, both wet and dry. General coding was used for lithological logging and was kept simple as the host lithology seldom differs and it is mainly the degree of alteration and foliation of the granite that varies due to later cross-cutting mineralised shears. These exploration holes are not intended to be used as part of a mineral resource estimate at this stage but data was recorded to the standard to allow for future use in a resource estimate. |
|
|
Sub-sampling techniques and sample preparation |
• If core, whether cut or sawn and whether quarter, half or all core taken. |
All diamond drill core samples were of half core cut by trained operators using an automated diamond core saw at the ALS Pitea sample prep facility in |
|
|
Quality of assay data and laboratory tests |
• The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. |
The assay technique is considered near total and has consistently been used for all samples at Olserum. |
|
|
Verification of sampling and assaying |
• The verification of significant intersections by either independent or alternative company personnel. |
Mrs |
|
|
Location of data points |
• Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. |
Drill hole coordinates were recorded with a Garmin GPS Map 64 and also checked with iPhone and Swedish MyMap Lidar topography app on smart phone. |
|
|
Data spacing and distribution |
• Data spacing for reporting of Exploration Results. |
The scout drill program was not intended to define a resource. The spacing has shown that mineralisation is hosted in structures which are expected to extend beyond the area of drilling based on surface mapping albeit it is expected that grade will be variable within the structure. Intersections are reported based on length-weighted grades of mineralised intervals. |
|
|
Orientation of data in relation to geological structure |
• Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. |
All holes reported here were drilled at either -45 or -65 degrees and as near perpendicular as possible to the mineralised structures and drilling was carried out to normal industry standards.
Previous grab samples mentioned in this RNS may show bias due to limited exposure which represent the centre of a structure compared to hard wallrock mineralisation which is competent and difficult to sample with a hammer. |
|
|
Sample security |
The measures taken to ensure sample security |
Core was kept in a locked facility and securely strapped to pallets for transport direct to ALS Pitea for cutting and assay. |
|
|
Audits or reviews |
• The results of any audits or reviews of sampling techniques and data. |
Not applicable, these are initial results of a scout drilling program. |
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
|
Criteria |
Explanation |
Explanation |
||||||||||||||||||||||||||||||||
|
Mineral tenement and land tenure status |
Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. |
All permits relating to the Olserum project are 100%-owned by European Mineral Exploration AB (registered in |
||||||||||||||||||||||||||||||||
|
Exploration done |
Acknowledgment and appraisal of exploration by other parties. |
Minimal fieldwork has been conducted by other operators in the past and the focus was on the Olserum resource area 2.3km southwest of Djupedal, and 300m from Olserum West, where a historic resource estimate was defined by IGE and Tasman Metals (2013). The first three holes drilled at the Olserum project was at Djupedal in 2003 but all 3 holes were drilled to the south, near parallel to the mineralised structures which they failed to intersect. The area has since been deforested with more exposure and a new deposit model. Drilling of holes OLS24-01 to 04 successfully intersected the structure drilling to the northeast. |
||||||||||||||||||||||||||||||||
|
Geology |
Deposit type, geological setting and style of mineralisation. |
REE mineralisation is hosted in biotite-magnetite altered shear zones crosscutting the red hematised Olserum granite, a peraluminous alkali-feldspar granite. The Olserum-Djupedal granite is interpreted to be an anatectic granite that was produced by partial melting at ~1.80 Ga. Major crustal scale structures, part of the Loftahammar-Linköping |
||||||||||||||||||||||||||||||||
|
Drill hole Information |
A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: • dip and azimuth of the hole |
Table included in the RNS above. |
||||||||||||||||||||||||||||||||
|
Data aggregation methods |
In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (e.g. cutting of high grades) and cut-off grades are usually Material and should be stated. |
Length weighted grades are reported for samples above a cut-off of 0.4% TREO and with no greater than 2m of internal dilution. Broader mineralised zones are also described but may be less than 0.4% TREO cut-off used in the historical resource estimate. These are marked in the table above. Table of Conversion Factors:
|
||||||||||||||||||||||||||||||||
|
Relationship between mineralisation widths and intercept lengths |
• These relationships are particularly important in the reporting of Exploration Results. |
True width is estimated at 85-90% of the down hole length for -45 degree holes drilled across the structures e.g. the mineralised structure in OLS24-07 dips c.70 degrees to the southwest. At Olserum West the dip is c.80-85 degrees to the north and true width is approximately 82% of the reported intersections for OLS24-11 and 57% for OLS24-12. |
||||||||||||||||||||||||||||||||
|
Diagrams |
Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views. |
Drill hole location map and sections included in the RNS above. Note that sections are preliminary in nature and based on leapfrog modelling. Further refinement of the 3D model is required. |
||||||||||||||||||||||||||||||||
|
Balanced reporting |
Where comprehensive reporting of all Exploration Results is not practicable, representative |
Samples are reported over the target structures of significant width and grade. Other samples away from these structures are not expected to have economic mineralisation and may be sampled to improve the understanding of the mineralisation/geochemistry etc. |
||||||||||||||||||||||||||||||||
|
Other |
Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances. |
Previous metallurgical testwork on a composite sample from the Olserum resource has shown that monazite and xenotime can be concentrated with standard flotation after magnetite is removed using wet low-intensity magnetic separation. Deleterious elements are considered low on average and not directly proportional to REO grade. The highest value for uranium in any sample reported in the intersections in this RNS is 336ppm over 0.45m in OLS24-07 (42m to 42.45m). The highest value of uranium encountered in this drill program is 1275ppm U over 0.45m in OLS24-09 at Djupedal and is outside of any reported intersections for REEs. |
||||||||||||||||||||||||||||||||
|
Further work |
• The nature and scale of planned further work (e.g. tests for lateral extensions or depth |
The mineralisation is open along strike and at depth and is expected to be variable in thickness and grade along the shear zone structures. Further drilling along strike and downdip of these holes is warranted to expand the scale of the mineralisation and potentially locate higher grade shoots or dilations within the shear system. |
-ENDS-
Enquiries
European Green Transition plc
|
|
+44 (0) 208 058 6129 |
|
|
|
|
|
|
Panmure Liberum - Nominated Adviser and Broker
|
|
+ 44 (0) 20 7886 2500 |
Camarco - Financial PR
|
|
europeangreentransition@camarco.co.uk + 44 (0) 20 3757 4980
|
Notes to Editors
European Green Transition plc (quoted on the AIM market of the London Stock Exchange under the ticker "EGT") is a business operating in the green transition space in
For more information, please go to www.europeangreentransition.com or follow us on X (formerly Twitter ) and LinkedIn.
RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our Privacy Policy.
Proactive Investors is a publisher of financial news and information. No content in this record, or published on the Proactive Investors website (the "Site"), constitutes a recommendation that any particular security, portfolio of securities, transaction, or investment strategy is suitable or advisable for any specific person. No content is tailored to any specific person's needs, objectives, or financial situation.
Proactive Investors is not a registered investment adviser or broker-dealer and does not provide personalized investment advice. Nothing in this record constitutes investment advice or a recommendation to buy, hold, or sell any security. None of the information providers or their affiliates will advise you personally concerning the nature, potential, advisability, value, or suitability of any particular security, portfolio, transaction, or investment strategy. Any decision to buy, sell, or hold a security should be made only after consulting an appropriately qualified, licensed financial adviser and reading all relevant offering documentation.
This record, and any record we publish by or on behalf of our clients, should not be construed as an offer or solicitation to buy or sell any product or security. Our content is independent financial journalism, produced in a neutral, objective style with full source attribution.
In accordance with the Federal Trade Commission's guidelines on material connections, Proactive Investors discloses the following: we may receive cash or, in some cases, equity compensation from companies whose news is distributed through our platform. This compensation is for news distribution and media services, not for editorial content or coverage decisions. Where Proactive Investors has a commercial relationship with a company covered in this record, that relationship is disclosed within the article. Any such relationship does not determine, influence, or shape the editorial content produced. Where we receive equity compensation, such securities are held independently by a third-party broker and sold at the broker's discretion.
The Site may contain opinions from time to time regarding securities mentioned in other products, including company-related products, and those opinions may differ from those obtained through another Proactive Investors product. Opinions and commentary reflect the views of the named author at the time of writing and are subject to change without notice.
Price and other data is supplied by sources believed to be reliable. Any calculations are made using such data. Neither the data nor the calculations are guaranteed by those sources, by Proactive Investors, by the information providers, or by any other person or entity, and may not be complete or accurate.
From time to time, reference may be made in our marketing materials to previously published articles or opinions. Such references may be selective, may reference only a portion of an article, and are likely not to be current. As markets change continuously, previously published information and data may not be current and should not be relied upon.
FOR OUR FULL DISCLAIMER CLICK HERE