Atalaya Mining PLC - New Resource Estimates: San Dionisio & San Antonio
A version of this announcement containing all referenced figures can be found on
the Company's website at www.atalayamining.com (the "Website Announcement").
Atalaya Mining Plc.
("Atalaya" or "the Company")
New Independent Mineral Resource Estimates for San Dionisio and
Including open pit zone at San Dionisio with an estimated copper resource grade
that is ~140% higher than existing reserves at Cerro Colorado open pit
Atalaya Mining Plc (AIM: ATYM, TSX: AYM) is pleased to announce new Mineral Resource Estimates, prepared in accordance with CIM guidelines and disclosure requirements of NI 43-101, for its San Dionisio and
Highlights
·
‒ M&I Resource: 56.1 Mt at 0.91% Cu, 1.14% Zn, 0.23% Pb (0.15% Cu cut-off)
‒ Copper resource grade: ~140% higher than existing reserves at Cerro Colorado
· San Dionisio Underground: polymetallic resource located below potential open pit
‒ Inferred Resource: 12.4 Mt at 1.01% Cu, 2.54% Zn, 0.62% Pb
· San Antonio Underground: polymetallic resource east of the Cerro Colorado pit
‒ Inferred Resource: 11.8 Mt at 1.32% Cu, 1.79% Zn, 0.99% Pb
· Preliminary Economic Assessment ("PEA") is planned during 2022 for an operating schedule that combines
· Subject to the relocation of certain infrastructure and receipt of final permits, the potential open pit at San Dionisio could begin to deliver material to the Proyecto Riotinto plant by mid to late 2023
‒ Could potentially account for approximately one-third of processing capacity, with
‒ San Dionisio contains copper mineralisation that could be processed at the existing plant with minimal modifications
‒ Contribution from San Dionisio could potentially provide an uplift to Riotinto copper production by increasing the blended head grade
"The completion of an independent Mineral Resource Estimate for the San Dionisio deposit is an important milestone for Atalaya. As a result of its location beside
Similarly, the new NI 43-101 compliant Mineral Resource Estimate for
Proyecto Riotinto Overview
Since its restart in 2015, all mining at Proyecto Riotinto has been conducted from the Cerro Colorado open pit. The other known mineral deposits within the Riotinto concession area - the San Dionisio deposit and the
The San Dionisio deposit is located less than 1 kilometre west of the Cerro Colorado pit, and was historically mined by the Corta Atalaya open pit and the Pozo Alfredo underground mine, which targeted copper-rich stockwork and massive sulphide mineralisation.
The
Figure 1: Approximate Locations of Riotinto orebodies (refer to Website announcement)
New Proyecto Riotinto NI 43-101 Technical Report
Ore Reserves Engineering of
San Dionisio Mineral Resource Estimation Details
The drilling data used for resource estimation was based on 1,003 drillholes over 83,554 metres, of which 45 holes over 16,991 metres were completed by Atalaya between 2015-2021, while the remainder by past operators.
The Mineral Resource model was created as a three-dimensional block model using Datamine Studio RM software. The model block size is 10x10x10 metres, which is consistent with the estimated mining bench height and the estimated selective mining unit. The horizontal extent of the model is defined to cover the San Dionisio deposit, plus sufficient space outside the deposit to cover the ultimate pit.
San Dionisio Mineral Resource Estimate
Table 1:
|
|
|||||||||||
|
% Cu |
|
|
Grade |
|
Contained Metal |
|
|||||
|
cut-off |
Class |
Mt |
Cu % |
Zn % |
Pb % |
|
Cu kt |
Zn kt |
Pb kt |
|
|
|
0.14 |
Measured |
50.8 |
0.92 |
1.09 |
0.21 |
|
467 |
556 |
108 |
|
|
|
Indicated |
6.6 |
0.70 |
1.31 |
0.35 |
|
46 |
86 |
23 |
|
||
|
M+I |
57.4 |
0.89 |
1.12 |
0.23 |
|
513 |
642 |
131 |
|
||
|
Inferred |
0.9 |
0.77 |
0.54 |
0.23 |
|
7 |
5 |
2 |
|
||
|
0.15 |
Measured |
49.7 |
0.94 |
1.11 |
0.22 |
|
466 |
552 |
107 |
|
|
|
Indicated |
6.4 |
0.71 |
1.33 |
0.35 |
|
46 |
86 |
23 |
|
||
|
M+I |
56.1 |
0.91 |
1.14 |
0.23 |
|
511 |
638 |
130 |
|
||
|
Inferred |
0.8 |
0.78 |
0.55 |
0.23 |
|
7 |
5 |
2 |
|
||
|
0.16 |
Measured |
48.5 |
0.96 |
1.13 |
0.22 |
|
464 |
548 |
106 |
|
|
|
Indicated |
6.3 |
0.72 |
1.35 |
0.36 |
|
45 |
85 |
22 |
|
||
|
M+I |
54.8 |
0.93 |
1.16 |
0.23 |
|
509 |
633 |
128 |
|
||
|
Inferred |
0.8 |
0.79 |
0.56 |
0.24 |
|
7 |
5 |
2 |
|
||
Notes:
Table 2:
|
|
|||||||||||
|
% Cu |
|
|
Grade |
|
Contained Metal |
|
|||||
|
cut-off |
Class |
Mt |
Cu % |
Zn % |
Pb % |
|
Cu kt |
Zn kt |
Pb kt |
|
|
|
0.15 |
Measured |
27.0 |
0.78 |
0.28 |
0.06 |
|
212 |
75 |
17 |
|
|
|
Indicated |
2.0 |
0.66 |
0.18 |
0.04 |
|
13 |
4 |
1 |
|
||
|
M+I |
29.0 |
0.78 |
0.27 |
0.06 |
|
225 |
78 |
18 |
|
||
|
Inferred |
0.4 |
0.95 |
0.19 |
0.03 |
|
4 |
1 |
0 |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
% Cu |
|
|
Grade |
|
Contained Metal |
|
|||||
|
cut-off |
Class |
Mt |
Cu % |
Zn % |
Pb % |
|
Cu kt |
Zn kt |
Pb kt |
|
|
|
0.15 |
Measured |
22.6 |
1.12 |
2.11 |
0.40 |
|
253 |
477 |
90 |
|
|
|
Indicated |
4.4 |
0.73 |
1.85 |
0.49 |
|
32 |
82 |
22 |
|
||
|
M+I |
27.0 |
1.06 |
2.07 |
0.41 |
|
286 |
559 |
112 |
|
||
|
Inferred |
0.4 |
0.62 |
0.91 |
0.43 |
|
3 |
4 |
2 |
|
||
Notes:
Table 3: San Dionisio Underground
|
San Dionisio Underground - Total Mineral Resource |
|
||||||||||
|
|
|
|
Grade |
|
Contained Metal |
||||||
|
|
|
Mt |
Cu % |
Zn % |
Pb % |
|
Cu kt |
Zn kt |
Pb kt |
||
|
Inferred Resource |
|
12.4 |
1.01 |
2.54 |
0.62 |
|
125 |
315 |
76 |
||
Notes:
Planned Preliminary Economic Assessment
The new Mineral Resource Estimate for San Dionisio will be used to support a PEA that considers concurrent mining from the Cerro Colorado open pit and the open pit portion of the San Dionisio deposit. Atalaya expects to complete the PEA in 2022.
San Dionisio Conceptual Development Plan
Based on the new Mineral Resource Estimate and prior internal studies, Atalaya believes that the development of the San Dionisio deposit has the potential to create significant value for the Company. The Company will further evaluate the development plan in the PEA.
Mining
The open pit portion of the Mineral Resource at San Dionisio is expected to be mineable by conventional open pit methods, with San Dionisio being an extension of the operating
Mining would be conducted concurrently at San Dionisio and
Processing
San Dionisio has two main types of mineralisation - copper and polymetallic. In the initial years of operation, copper-rich material plus approximately 10% high-grade polymetallic material would be mined from the upper zones of the Mineral Resource and processed. According to past metallurgical tests and additional work completed by the Company, it is expected that San Dionisio copper material could be blended with ore from
Upon transitioning to the polymetallic mineralisation, certain modifications to the plant are expected to be required in order to improve copper recoveries and recover zinc and lead. Options include the addition of a conventional differential flotation circuit, and / or the application of the E-LIX System. Atalaya recently approved construction of a Phase I industrial plant that utilises the E-LIX System.
Impact
The contribution by San Dionisio of approximately one-third of future processing feed is expected to provide an uplift to the blended grade at the plant, due to San Dionisio's open pit copper resource grade being approximately 140% higher than
As other deposits in the
Permitting
The Company is advancing the various permits and modifications required to develop the San Dionisio deposit and to continue operations at Cerro Colorado, including those related to relocating the public road, power lines and water lines, additional long term tailings capacity and heritage matters.
San Antonio Mineral Resource Estimation Details
The drilling data used for resource estimation was based on 185 drillholes over 18,305 metres, of which 8 holes over 1,504 metres were completed by Atalaya, with the remainder by past operators.
The Mineral Resource model for the mineralised zone of
San Antonio Mineral Resource Estimate
Table 4: San Antonio Underground
|
San Antonio Underground - Total Mineral Resource |
|
||||||||||
|
|
|
|
Grade |
|
Contained Metal |
||||||
|
|
|
Mt |
Cu % |
Zn % |
Pb % |
|
Cu kt |
Zn kt |
Pb kt |
||
|
Inferred Resource |
|
11.8 |
1.32 |
1.79 |
0.99 |
|
155 |
210 |
117 |
||
Notes:
San Antonio Conceptual Development Plan
Mining of the
In advance of any development decision for
Qualified Person Statement
The Mineral Resource Estimates for San Dionisio and
Glossary of Terms
|
Ag |
Silver |
|
Au |
Gold |
|
CIM |
Canadian Institute of Mining, Metallurgy and Petroleum |
|
Cu |
Copper |
|
CuEq |
Copper Equivalent |
|
FLEM |
Fixed Loop Electromagnetic Survey |
|
g/t |
Grams per tonne |
|
Indicated Mineral Resources |
An Indicated Mineral Resource is that part of a Mineral Resource for which quantity, grade or quality, densities, shape and physical characteristics are estimated with sufficient confidence to allow the application of Modifying Factors in sufficient detail to support mine planning and evaluation of the economic viability of the deposit.
Geological evidence is derived from adequately detailed and reliable exploration, sampling and testing and is sufficient to assume geological and grade or quality continuity between points of observation.
An Indicated Mineral Resource has a lower level of confidence than that applying to a Measured Mineral Resource and may only be converted to a Probable Mineral Reserve. |
|
Inferred Mineral Resource |
An Inferred Mineral Resource is that part of a Mineral Resource for which quantity and grade or quality are estimated on the basis of limited geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological and grade or quality continuity.
An Inferred Mineral Resource has a lower level of confidence than that applying to an Indicated Mineral Resource and must not be converted to a Mineral Reserve. It is reasonably expected that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration. |
|
kt |
Thousand tonnes |
|
Measured Mineral Resources |
A Measured Mineral Resource is that part of a Mineral Resource for which quantity, grade or quality, densities, shape, and physical characteristics are estimated with confidence sufficient to allow the application of Modifying Factors to support detailed mine planning and final evaluation of the economic viability of the deposit.
Geological evidence is derived from detailed and reliable exploration, sampling and testing and is sufficient to confirm geological and grade or quality continuity between points of observation. A Measured Mineral Resource has a higher level of confidence than that applying to either an Indicated Mineral Resource or an Inferred Mineral Resource. It may be converted to a Proven Mineral Reserve or to a Probable Mineral Reserve. |
|
M&I Mineral Resources |
The aggregate of Measures Mineral Resources and Indicated Mineral Resources. |
|
Mineral Resources |
A concentration or occurrence of material of intrinsic economic interest in or on the Earth's crust in such a form and quantity that there are reasonable prospects for eventual economic extraction. The location, quantity, grade, geological characteristics and continuity of a Mineral Resource are known, estimated or interpreted from specific geological evidence and knowledge. Mineral Resources are sub-divided, in order of increasing geological confidence, into Inferred, Indicated and Measured categories. |
|
Mt |
Million tonnes |
|
Mtpa |
Million tonnes per annum |
|
n.a. |
Not available |
|
NI 43-101 |
Canadian National Instrument for the Standards of Disclosure for Mineral Projects |
|
ORE |
Ore Reserves Engineering |
|
Pb |
Lead |
|
PEA |
Preliminary Economic Assessment |
|
PPM |
Parts per million |
|
S |
Sulphur |
|
Stockwork |
It's a complex 3D network of structurally controlled or randomly oriented veins. They are common in many ore deposit types. They are also referred to as stringer zones. |
|
VMS |
Volcanic Massive Sulphide |
|
Zn |
Zinc |
This announcement contains information which, prior to its publication constituted inside information for the purposes of Article 7 of Regulation (EU) No 596/2014.
Contacts:
|
SEC Newgate UK |
|
+ 44 20 3757 6882 |
|
4C Communications |
|
+44 20 3170 7973 |
|
Canaccord Genuity (NOMAD and Joint Broker) |
|
+44 20 7523 8000 |
|
BMO Capital Markets (Joint Broker) |
|
+44 20 7236 1010 |
|
Peel Hunt LLP (Joint Broker) |
|
+44 20 7418 8900 |
About Atalaya Mining Plc
Atalaya is an AIM and TSX-listed mining and development group which produces copper concentrates and silver by-product at its wholly owned Proyecto Riotinto site in southwest
RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our Privacy Policy.
This content is published by Proactive Investors Limited and made available subject to the terms and conditions of use of its website (see Terms of Use).
Proactive Investors is a full-service financial newswire. We produce independent, objective financial journalism and do not provide personalised investment advice, act as a broker, or recommend specific securities to individual investors.
Financial content published on this Site is produced under the journalist exemption provided for in Article 20 of the Financial Services and Markets Act 2000 (Financial Promotion) Order 2005, and in accordance with FCA guidance at PERG 8.12. Where a communication is not otherwise exempt, it is issued or approved for distribution in the UK by Proactive Investors Limited.
All information used in the preparation of this communication has been compiled from publicly available sources that we believe to be reliable, however, we cannot, and do not, guarantee the accuracy or completeness of this communication.
This communication is intended for information purposes only and does not constitute investment advice, a personal recommendation, an offer, solicitation, or inducement to buy or sell any investment or financial product. Opinions and commentary reflect the views of the named author at the time of writing and are subject to change without notice.
This communication has been prepared without taking account of the objectives, financial situation or needs of any particular investor. Before entering into any transaction, investors should consider suitability for their individual circumstances and should read the relevant prospectus, term sheet, subscription agreement, information memorandum, prospectus or other offering document in full.
Past performance is not a reliable indicator of future results. The value of investments can fall as well as rise, and you may not recover the amount you invest.
This communication may contain information obtained from third parties, including credit ratings and financial data. Reproduction and distribution of third-party content in any form is prohibited except with the prior written consent of the relevant third party. Credit ratings are statements of opinion and should not be relied upon as investment advice.
FOR OUR FULL DISCLAIMER CLICK HERE